®
American DJ
User Instructions
CAUTION! Read instructions before installing or plugging unit in.
SPECIFICATIONS: MODEL -
Spirograph™
HALOGEN LAMP WARNING!
This fixture is fitte d with ha lo g e n
la m p s whic h a re hig hly susc e p ti-
b le to d a m a g e if im p ro p e rly
ha nd le d . Ne ve r to uc h la m p with
b a re fing e rs a s the o il fro m yo ur
ha nd s will sho rte n la m p life . Also ,
n e ve r m o ve fixtu re u n til la m p
h a s h a d a m p le tim e to c o o l.
Re m e m b e r, la m p s a re no t c o v-
e re d und e r wa rra nty c o nd itio ns.
Weight:
Size:
Lamp:
Fuse:
Voltage In: 120V
Working
Position:
8 lbs.
8.5" H x 8" W x 15" L
ZB-EXN 12V 50W
3A
Any Safe position
Duty Cycle: None
Thank you for purchasing the Spiral Graph™ by American DJ®. For your convenience the Spiral
Graph™ has been lamped and is ready to be used, there is no assembly required. Please read the fol-
lowing instructions before installing or using your new Spiral Graph™.
Operating Instructions:
Unit is ready to be hung or set on flat surface. Unit will rotate wheel slowly making a unique, vibrant kaliedoscopic effect
that produces a multi-colored and multi-textured effect . Motor rotation will start when unit is turned on/off. For best
results,shine on a light colored wall or ceiling. we suggest using fog or special effects smoke when using this unit. This
will enhance the effect allowing you to see the beams of light. Use an American DJ® high quality mobile pro fog machine.
Caution! Never open unit when in use. Always disconnect main power before serving or replacing lamp. Remember
always replace same lamp and fuses.
Lamp replacement: Remove single knurled screws from top of unit, , and remove top panel and disconnect lamp from
socket. Remove and replace lamp.
Affo rd a b le Qua lity Lig hting Pro d uc ts fro m American DJ Lo s Ang e le s, CA. 90058 USA
®
|